Friday, November 18, 2011

How to Remove Outside Mirrors on Acura Integra?

The procedure with diagrams is as follows :---


REMOVAL & INSTALLATION



See Figures 1 and 2
Click image to see an enlarged view
Fig. Fig. 1: Remove the interior mirror trim


Click image to see an enlarged view
Fig. Fig. 2: Squeeze the connector harness to release the wiring from the mirror assembly
  1. Disconnect the negative battery cable.
  2. Remove the door panel, as outlined later in this section.
  3. Remove the screw cover and the retaining screw for the mirror cover.
  4. Unplug the connector for the power mirror.
  5. Unfasten the three mirror retaining screws, then remove the mirror.
To install:
  1. Place the mirror into position and install the retaining screws.
  2. Attach the connector for the power mirror.
  3. Install the mirror cover, retaining screw, and screw cover.
  4. Install the door panel, as outlined later in this section.
  5. Connect the negative battery cable.


-------------

For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

Car wont start?


No comments:

Post a Comment