Saturday, November 19, 2011

How to remove speakers on Acura Car models?

If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

The procedure is as follows :---



See Figures 1 and 2
Click image to see an enlarged view
Fig. Fig. 1: Removing an Acura door mounted speaker

Click image to see an enlarged view
Fig. Fig. 2: Note how this old, dry rotted speaker has torn away from the foam rubber that keeps the paper cone suspended. At this point the only cure is to replace the entire speaker; if not sound quality will suffer
  1. Disconnect the negative battery cable.
  2. Remove any necessary paneling to gain access to the speaker.
  3. Remove the protective mesh grill if applicable.
  4. Unfasten the speaker mounting screws.
  5. Pull the speaker partially up, then detach the electrical connector.
See Figure 3
Click image to see an enlarged view
Fig. Fig. 3: Detach the wiring harness from the rear of the speaker
  1. Remove the speaker from the vehicle.
See Figure 4
Click image to see an enlarged view
Fig. Fig. 4: Remove the plastic baffle from the speaker
  1. Installation is the reverse of the removal procedure.

For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.


The car will not start?


Car will not crank?


Car has no spark?


How to troubleshoot car battery?


How to test starter solenoid?


How to test cars starter?

How to replace starter in car?


car will turn over but will not start?


Car wont start?


No comments:

Post a Comment