Friday, November 18, 2011

Windshield repairs and replacement on car?

The procedure is as follows :---


Windshield and Fixed Glass


REMOVAL & INSTALLATION



If your windshield, or other fixed window, is cracked or chipped, you may decide to replace it with a new one yourself. However, there are two main reasons why replacement windshields and other window glass should be installed only by a professional automotive glass technician: safety and cost.
The most important reason a professional should install automotive glass is for safety. The glass in the vehicle, especially the windshield, is designed with safety in mind in case of a collision. The windshield is specially manufactured from two panes of specially-tempered glass with a thin layer of transparent plastic between them. This construction allows the glass to "give" in the event that a part of your body hits the windshield during the collision, and prevents the glass from shattering, which could cause lacerations, blinding and other harm to passengers of the vehicle. The other fixed windows are designed to be tempered so that if they break during a collision, they shatter in such a way that there are no large pointed glass pieces. The professional automotive glass technician knows how to install the glass in a vehicle so that it will function optimally during a collision. Without the proper experience, knowledge and tools, installing a piece of automotive glass yourself could lead to additional harm if an accident should ever occur.
Cost is also a factor when deciding to install automotive glass yourself. Performing this could cost you much more than a professional may charge for the same job. Since the windshield is designed to break under stress, an often life saving characteristic, windshields tend to break VERY easily when an inexperienced person attempts to install one. Do-it-yourselfers buying two, three or even four windshields from a salvage yard because they have broken them during installation are common stories. Also, since the automotive glass is designed to prevent the outside elements from entering your vehicle, improper installation can lead to water and air leaks. Annoying whining noises at highway speeds from air leaks or inside body panel rusting from water leaks can add to your stress level and subtract from your wallet. After buying two or three windshields, installing them and ending up with a leak that produces a noise while driving and water damage during rainstorms, the cost of having a professional do it correctly the first time may be much more alluring. Therefore, it is advised that you have a professional automotive glass technician service any broken glass on your vehicle.

WINDSHIELD CHIP REPAIR



Check with your state and local authorities on the laws for state safety inspection. Some states or municipalities may not allow chip repair as a viable option for correcting stone damage to your windshield.
Although severely cracked or damaged windshields must be replaced, there is something that you can do to prolong or even prevent the need for replacement of a chipped windshield. There are many companies which offer windshield chip repair products, such as Loctite's® Bullseye windshield repair kit. These kits usually consist of a syringe, pedestal and a sealing adhesive. The syringe is mounted on the pedestal and is used to create a vacuum which pulls the plastic layer against the glass. This helps make the chip transparent. The adhesive is then injected which seals the chip and helps to prevent further stress cracks from developing. Refer to the sequence of photos to get a general idea of what windshield chip repair involves.
Always follow the specific manufacturer's instructions.
See Figures 1 through 15
Click image to see an enlarged view
Fig. Fig. 1: Small chips on your windshield can be fixed with an aftermarket repair kit, such as the one from Loctite


Click image to see an enlarged view
Fig. Fig. 2: To repair a chip, clean the windshield with glass cleaner and dry it completely


Click image to see an enlarged view
Fig. Fig. 3: Remove the center from the adhesive disc and peel off the backing from one side of the disc ...


Click image to see an enlarged view
Fig. Fig. 4: ... then press it on the windshield so that the chip is centered in the hole


Click image to see an enlarged view
Fig. Fig. 5: Be sure that the tab points upward on the windshield


Click image to see an enlarged view
Fig. Fig. 6: Peel the backing off the exposed side of the adhesive disc ...


Click image to see an enlarged view
Fig. Fig. 7: ... then position the plastic pedestal on the adhesive disc, ensuring that the tabs are aligned


Click image to see an enlarged view
Fig. Fig. 8: Press the pedestal firmly on the adhesive disc to create an adequate seal ...


Click image to see an enlarged view
Fig. Fig. 9: ... then install the applicator syringe nipple in the pedestal's hole


Click image to see an enlarged view
Fig. Fig. 10: Hold the syringe with one hand while pulling the plunger back with the other hand


Click image to see an enlarged view
Fig. Fig. 11: After applying the solution, allow the entire assembly to sit until it has set completely


Click image to see an enlarged view
Fig. Fig. 12: After the solution has set, remove the syringe from the pedestal ...


Click image to see an enlarged view
Fig. Fig. 13: ... then peel the pedestal off of the adhesive disc ...


Click image to see an enlarged view
Fig. Fig. 14: ... and peel the adhesive disc off of the windshield


Click image to see an enlarged view
Fig. Fig. 15: The chip will still be slightly visible, but it should be filled with the hardened solution

----------


For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

Car wont start?



No comments:

Post a Comment