Friday, February 24, 2012

Oldsmobile Manifold Absolute Pressure (MAP) Sensor replacement?

The complete detail to replace MAP sensor is as follows :---

Manifold Absolute Pressure (MAP) Sensor


REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2. Locate the MAP sensor and remove the retaining screws
  3. Detach the electrical connector.


Click image to see an enlarged view
Fig. On the 3.1L engine, the MAP sensor is located alongside the intake manifold


Click image to see an enlarged view
Fig. MAP sensor and its bracket arrangement-3.4L (VIN E) engine


Click image to see an enlarged view
Fig. Location of the MAP sensor on the throttle body adapter-3.4L (VIN X) Engine


Click image to see an enlarged view
Fig. The MAP sensor is located just behind the throttle body mounting base-3.5L (VIN H) engine


Click image to see an enlarged view
Fig. MAP sensor and its location alongside the supercharger-3.8L (VIN 1) Engine


Click image to see an enlarged view
Fig. On the 3.8L (VIN K) engine, the MAP sensor is located on top of the PCV valve cover
  1. Remove the vacuum hose and lift the MAP sensor from the engine.
  2. Installation is reverse of the removal procedure.


This instructions will help you.Tanks.


No comments:

Post a Comment