Tuesday, March 6, 2012

Acura 1994 to 2000 Sway Bar Replacing?


Sway Bar
REMOVAL & INSTALLATION: ---

The details are as follows :----


REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle to gain access to the sway bar.
  3. Unfasten the left and right sway bar link retaining nuts.
  4. Remove the sway bar links from the sway bar and set aside.
  5. Unfasten the sway bar insulator bracket-to-sub-frame bolts.
It may be necessary to lower the sub-frame to access the sway bar
  1. Remove the sway bar from the vehicle.
To install:
  1. Position the sway bar into the vehicle and secure with the mounting bracket-to-sub-frame bolts.
  2. Attach the sway bar links to each side of the sway bar.
  3. Reinstall the retaining nuts.
  4. Carefully lower the vehicle.
  5. Connect the negative battery cable.
  6. Road test the vehicle and check for proper operation.

This will help.
Thanks.



No comments:

Post a Comment