Monday, March 5, 2012

Acura Shock Absorber Replace?

Shock Absorber
The details are as follows :---

  1. Before servicing the vehicle, refer to the precautions section.
  2. Support the vehicle under the lower control arm.
  3. Remove or disconnect the following:

    Rear wheel
    Upper shock absorber flange bolt
    Lower shock absorber nut
    Shock absorber
To install:
  1. Install or connect the following:

    Shock absorber. Tighten the fasteners to 47 ft. lbs. (64 Nm).
    Rear wheel
This will help.

No comments:

Post a Comment