Monday, March 5, 2012

Acura Upper Control Arm Replacing?


Upper Control Arm
CONTROL ARM BUSHING REPLACEMENT
REMOVAL & INSTALLATION


The details are as follows :----

Control Arm Bushing Replacement



The control arm bushings are serviced with the control arms as an assembly.

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2. Support the control arm at the knuckle.
  3. Remove or disconnect the following:

    Wheel
    Upper ball joint from the knuckle
    Upper arm bolt and the arm
  4. Installation is the reverse of removal. Tighten the arm bolt to 47 ft. lbs. (64 Nm) and the ball joint nut to 36-43 ft. lbs. (49-59 Nm).

This will help.
Thanks.




No comments:

Post a Comment