Monday, March 5, 2012

Exhaust Manifold Replacing on Acura?


Exhaust Manifold
REMOVAL & INSTALLATION: ---

The details are as follows :----


Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following:

    Negative battery cable
    Exhaust manifold heat shield
    Heated Oxygen (HO 2 S) sensor connector
    Exhaust front pipe
    Exhaust manifold bracket, if equipped
    Exhaust manifold
To install:
  1. Install or connect the following:

    Exhaust manifold. Tighten the fasteners to 23 ft. lbs. (31 Nm).
    Exhaust manifold bracket, if equipped. Tighten the bolts to 33 ft. lbs. (44 Nm).
    Exhaust front pipe. Tighten the nuts to 40 ft. lbs. (55 Nm).
    Heated Oxygen (HO 2 S) sensor connector
    Exhaust manifold heat shield
    Negative battery cable
This will help.
Thanks.


FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


No comments:

Post a Comment