Thursday, March 15, 2012

Flywheel Replacing procedure for 2.3L engine?


The procedure is similar for both Ford, Lincoln and Mercury car models:----
 Flywheel
REMOVAL & INSTALLATION
2.3L Engine
  1. Raise and safely support the vehicle.
  2. Remove the manual transaxle and clutch, as outlined in the Drive Train Section.
  3. Remove the 6 bolts and the flywheel.
To install:

NOTE
Special bolts are used for installation. Do not use standard bolts.

  1. Install the flywheel and tighten the bolts in the sequence shown in 3 stages: 

    Step 1: Tighten to 37 ft. lbs. (50 Nm)
    Step 2: Tighten to 59 ft. lbs. (80 Nm)
    Step 3: Tighten to 83 ft. lbs. (112) 

    image
    Fig. Flywheel bolt tightening sequence-2.3L engine
  2. Install the clutch and manual transaxle.

These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?



No comments:

Post a Comment