Monday, March 5, 2012

Front Suspension Lower Control Arm Removal on Acura?


Lower Control Arm
CONTROL ARM BUSHING REPLACEMENT
REMOVAL & INSTALLATION

The details are as follows :----

Control Arm Bushing Replacement



The control arm bushings are serviced with the control arms as an assembly.

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following:

    Front wheel
    Lower ball joint
    Front inner flange bolt
    Rear inner flange bolt
    Lower control arm
To install:

NOTE
Use a new split pin for assembly.

  1. Install or connect the following:

    Lower control arm. Tighten the inner flange bolts to 69 ft. lbs. (93 Nm).
    Lower ball joint. Tighten the nut to 43-51 ft. lbs. (59-69 Nm).
    Front wheel
  2. Check the wheel alignment and adjust as necessary.


This will help.
Thanks.



No comments:

Post a Comment