Monday, March 5, 2012

How to remove Front Suspension Coil Springs on Acura?

Coil Spring

The details are as follows :----

  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove the strut from the vehicle and install in a strut spring compressor. Compress the spring until the end of the spring comes away from the spring seat.
  3. Remove the upper strut mount, spring seat and related components.
  4. Remove the coil spring from the strut spring compressor.
To install:

Use a new self-locking nut.

  1. Compress the spring and position the strut so that the end of the spring aligns with the notch in the spring seat.
  2. Install the upper strut mounting components and tighten the nut to 33 ft. lbs. (44 Nm).
  3. Install the strut to the vehicle.
  4. Check the wheel alignment and adjust as necessary.

This will help.

No comments:

Post a Comment