Thursday, March 15, 2012

How to replace Blower Motor on Ford Fusion, Lincoln MKZ & Mercury Milan?


The procedure is similar for both Ford, Lincoln and Mercury car models:----

The details to replace blower motor are as follows:-------

Removal & Installation of blower motor:----

  1. Disconnect the negative battery cable.
  2. For the MKZ, remove the RH lower instrument panel insulator.
  3. Disconnect the blower motor electrical connector.
  4. Remove the 3 blower motor screws.
  5. Remove the blower motor.
  6. Installation is the reverse of the removal procedure. 

    Click image to see an enlarged view
    Fig. Blower motor mounting
Removal & Installation For other models blower motor the details are as follows: ------


  1. Remove the RH lower instrument panel insulator.
  2. Disconnect the blower motor electrical connector.
  3. Remove the 3 blower motor screws.
  4. Remove the blower motor.
  5. To install, reverse the removal procedure. 

    image
    Fig. Removing and installing the blower motor


These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html



No comments:

Post a Comment