Monday, March 5, 2012

How to replace front strut assembly on Acura?


Strut (MacPherson Strut) & Coil Spring
REMOVAL & INSTALLATION: ----

The details are as follows :---]


  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following: 

    Front wheel
    Wheel speed sensor wiring bracket
    Brake hose bracket
    Stabilizer bar link
    Strut pinch bolts
    Upper mount nuts
    Strut 

    image
    Fig. Exploded view of the front strut assembly
To install:
  1. Install or connect the following:

    Strut. Tighten the upper mount nuts to 43 ft. lbs. (59 Nm).
    Strut pinch bolts. Tighten the nuts to 116 ft. lbs. (157 Nm).
    Stabilizer bar link. Tighten the nut to 58 ft. lbs. (78 Nm).
    Brake hose bracket
    Wheel speed sensor wiring bracket
    Front wheel
  2. Check the wheel alignment and adjust as necessary.



This will help.
Thanks.




No comments:

Post a Comment