Tuesday, March 6, 2012

How to replace Valve covers or Rocker Arm Covers on Acura?


Valve (Rocker Arm) Covers
REMOVAL & INSTALLATION: ---
The details are as follows :----

2001-02 Models
  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following:

    Negative battery cable
    Air intake tube
    Ignition coil covers
    Intake manifold cover
    Intake manifold
    Valve cover
To install:
  1. Install or connect the following:

    Valve covers
    Intake manifold
    Intake manifold cover
    Ignition coil covers
    Air intake tube
    Negative battery cable
  2. Start the engine and check for leaks.
2003-06 Models
  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following:

    Negative battery cable
    Intake manifold cover
    Ignition coil covers
    Ignition coils
    Dipstick
    2 bolts attaching the harness holder
    Positive Crankcase ventilation (PCV) hose
    Injector electrical connections
    Power steering hose bracket bolt and the harness holder bolts
    Harness clamps and the breather hose
    Valve cover
To install:
  1. Install or connect the following:

    Valve covers
    Harness clamps and the breather hose
    Power steering hose bracket bolt and the harness holder bolts
    Injector electrical connections
    PCV hose
    2 bolts attaching the harness holder
    Dipstick
    Ignition coils and torque the retainers to 9 ft. lbs. (12 Nm)
    Ignition coil covers
    Intake manifold cover
    Negative battery cable


This will help.
Thanks.


FOR MORE HELP GO TO: ---

Car repair guide?




No comments:

Post a Comment