Tuesday, March 6, 2012

Rear suspension sway bar Removal for Acura?

Sway Bar
REMOVAL & INSTALLATION
Details are as follows :----


See Figure 1
image
Fig. Fig. 1: Removing the sway bar-to-sub-frame bolts
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle to gain access to the sway bar.
  3. Unfasten the left and right sway bar link retaining nuts.
  4. Remove the sway bar links from the sway bar and set aside.
  5. Unfasten the sway bar insulator bracket-to-sub-frame bolts, then remove the sway bar from the vehicle.
To install:
  1. Position the sway bar (stabilizer bar) into the vehicle and secure with the mounting bracket-to-sub-frame bolts.
  2. Attach the sway bar links to each side of the sway bar.
  3. Reinstall the retaining nuts.
  4. Carefully lower the vehicle.
  5. Connect the negative battery cable.
  6. Road test the vehicle and check for proper operation.

This will help.
Thanks.



No comments:

Post a Comment